The Flourishing Stretch Films Industry

When the world was first introduced to stretch film during the 1970s, it was an extremely cost-effective shipping solution, especially when compared to corrugated and strapping. With time, the packaging Vancouver film business has witnessed numerous technological improvements that have decreased both expenses and the total amount of plastic material that goes into the waste stream. Being wary of these changes would assist with making sure firms keep the costs per load effectively low.

Thin Films

Latest improvements in processes and materials have facilitated the introduction of high-performance and thinner stretch wrap films that feel and function like thicker traditional rolls. Stretch wrap machinery improvements have helped buyers benefit from these films. When applied properly, these high-performance wraps decrease the total cost-per-load by minimizing the amount of film required for a pallet. Pre-stretch, 250 percent levels, are becoming the norm; 63g material is pushing aside 80g material – with zero loss of abrasion resistance or containment. Based on the application, thinner films are being routinely used too.

Correct Film Application

Goods damaged during transit would nullify any profits made by spending little on product packaging. To control expenditure, buying decisions are usually price-per-roll-based instead of the total cost, resulting in a load that’s properly secured and enhancements in the entire wrapping process. Does your firm have enforced and hard-coded stretch wrapping norms? Is your stretch wrapper’s setting controlled by you? Is there a defined procedure to evaluate load containment? Is the loads’ appearance monitored routinely? Do you know the reasons why you are employing the stretch wrapping procedure? If you answered these questions in the negative, you are probably doing things wrong.

Sustainability and High Performance

There are three universally accepted sustainability laws: reduce, reuse, and recycle. Since reusing a stretch film is not possible once its cut off the pallets, material reduction continues to be the ideal “green” choice. Machine film weighing close to 800 million pounds is produced every year. An average of 0.5 pounds per pallet will equate to almost 1.6 billion wrapped pallets. If you consider the average 2 pounds pallet weight during the 1980s, the modern machine film industry will equate 3.2 billion pounds all by itself. Similar gauge deductions have occurred in hand wrap. The regular 100 gauge wrap from the 1980s has stepped aside for 47 gauge, thereby bringing down the amount of waste material heading to the waste stream by 50 percent. Besides these events, film recycling is increasingly becoming widespread. The recycled stretch film material’s high stabilization has permitted several extrusions with zero property loss. As per the 2007 ACC paper, stretch film’s recycling rate is more than 50 percent.


With the multitude of industry changes and several product options available, one can understand why people are having a difficult time choosing the right film for their needs. This is why associating with a supplier firm that can provide you with proper and correct analysis of your entire wrapping method has become a lot more important than before. Moreover, besides film type, devoting time and effort toward variables, which include shipping and storage conditions, machine-type, load-type and condition, pre-stretch levels, tension settings and total revolutions, would make sure all loads are secured properly using the least amount of plastic – and that your firm consistently maintains minimal costs for every effectively shipped load.

Share This:

Packaging Supplies: Getting The Best Product Packaging

The last step to delivering a product to the customer is finding the right packaging supplies. While this is not the product itself, it is the last consideration and sometimes an important one. The package should be easy to open, and the product should survive the handling process safely and intact. Of course, the material must also be cheap enough for you to run a business.

Packaging can be apart of the brand or just a generic box. Packaging that is apart of the product should help to sell the product and should also be appropriate for the product. If the product is plant-based and perishable, the package should keep it alive as long as possible. It is even the case that live chicks can be shipped through the mail with the right container and handling.

On the flip side, poor packaging might hurt the product. Something sharp should be restrained, and it might damage and burst through a poorly chosen package. Even hard edges can have this effect. The merchant should know what they are doing when securing and properly boxing a potentially dangerous product.

For a product that sits on a shelf, proper identification and the ability to sell are essential. The customer wants a good idea of what is being purchased. If they cannot see an assembled product, then they should at least see a big picture with a familiar object to provide scale.

The biggest criterion when choosing a box or hard plastic container is budget, transportation, the disposal of the materials, the product size, and the audience. Customers are not immediately attracted to whether or not they can recycle the trash, but it might be an issue later. Each criterion is explained below:

Fitting Materials To a Budget

The boxing material has to be suitable for the product, but it also has to meet a budget. Every business person would like to save money wherever possible, and the container of a product can be a substantial cost. Of course, ineffective packaging is more expensive, so it is important to study all the available options.

Some products are boxed in glass, wood, or particleboard cases. These are durable and can be attractive to customers, but they are not cheap. In the case of glass, it has to be protected if it is shipped through the mail and requires yet more packaging. A glass container is effectively part of the end product, and the customer has to be willing to pay to have the product in an expensive container.

Cheap options include low-grade and high-grade cardboard. They are both inexpensive that has the properties of resisting impacts are also reasonably durable. They can carry a logo and are fairly easy to shred or to take apart for disposal.

Plastic packaging is convenient but is also bait for a landfill. Some customers dislike a hoard of plastic wrapping and padding because they think about the environment. On the other hand, recycled plastic has avoided the landfill, and using recycled packaging can be apart of the sales pitch.

Thinking About Transportation Requirements

Having an attractive product with a package that looks good on a shelf is a desire that has to compete with the needs of safe handling and transportation. Cardboard and plastic are cheap but have the added benefit of padding the product for moving to the store and when the customer has to move it.

Safe handling also has legal requirements. Most areas require a package that is sturdy enough that the entire product can be moved safely under a variety of circumstances. If the package falls apart when professional movers try taking it up a staircase, then another professional company might sue yours for unsafe packaging.

The final package should be not much larger than the end product unless it is small and fragile. The shape should not be conventional, and it should be easy to post a picture and written information. If the product is an unusual shape, such as a ceramic figurine, then the box and padding will reasonably occupy much more volume than the product.

Picking Materials Approved By Environmentalists

Sustainability is a catchword that means good for the environment to the effect the same material can be safely used for a very long time. For a manufacturer, that generally means choosing packaging that is recycled and can be further recycled. Sometimes the ability to recycle does overlap with practical needs.

A very suitable packaging material that can be applied impromptu is shrink wrap that comes on a large roll and resembles an oversized version of plastic food wrap. It has many advantages, including the abilities to resist water and hold many small boxes together on a palate. Multiple layers can be as insulating as cardboard and can protect a product from impact damage.

Instant packaging material is handy when a small business needs to box products that are prone to spoiling or damage. Everything from food to cosmetics to used hardware tools can be protected and secured inside the box with some bubbled or bunched plastic. If it is recyclable, then all the better.

An oddly shaped product can be held fast with bubble wrap or even thick paper that has been crunched into wads. To that end, the shredded paper has been used as packaging simply because it is a reused material. Padding material can be seen or unseen and should be appropriate for the convenience of a product. If it is known to be fragile, then customers are willing to put up with protective padding.

Product Size and Audience

The perfect example of packaging is an assemblable piece of furniture that is disassembled so well that it all neatly fits into a rectangular box without any extra padding. Your product might not be so lucky, but the size does determine the strength of the box and the padding material used.

As for the audience, this is the end customer and must be willing to accept any inconvenience placed upon them. They will accept disassembled products if it is cheaper than preassembled furniture. They are willing to deal with package popcorn if the payoff is a rare and attractive centerpiece. If it feels special, then the audience will accept inconvenient packaging. If it feels generic, then the packaging should be upgraded for neatness and convenience.

Share This: